IPX DDK-1800 - Manual (Page 10)

2. INSTALLATION
Follow the instructions and the diagram below to set up the system.
NOTE: The DDK-1800D’s Video Out connector can be connected to a monitor via RCA
connection. When connected you will see information on the monitor screen,
including the DDK-1800D’s factory default IP address (192.168.1.168). The
DDK-1800D’s IP address will only appear if there is a connection between the
DDK-1800D and another device.
2.1 Hardware Installation
1. If using external power, connect power adapter to DDK-1800D.
2. Connect network cable to DDK-1800Ds RJ45 connection.
3. Confirm the correct network connection status.
4. Enter DDK-1800D’s IP address into your browser.
10