8e6 Technologies Threat Analysis Reporter TAR 1.0 - Manual (Page 23)

8
e
6 T
hreaT
a
nalysis
r
eporTer
Q
uick
s
TarT
G
uide
Step-by-Step Initial Setup Procedures
For these step-by-step procedures, you will need your network administrator to provide
you the LAN 1 (Ethernet 0) and LAN 2 (Ethernet 1) IP address and subnet mask, gate-
way IP address, DNS server IP address(es), host name of the server, and IP address for
the Web interface (if using a NAT device).
Login screen, password prompts
The login screen displays after powering on the Threat Analysis Reporter unit using a
monitor and keyboard, or after creating a HyperTerminal session.
NOTE: If the screensaver currently displays on your screen, press the Enter
key to display the login screen.
A. At the login prompt, type in menu.
B. Press the Enter key to display the Password prompt.
C. At the Password prompt, type in the following: #s3tup#r3k
D. Press Enter to display the System Configuration screen: