8e6 Technologies Threat Analysis Reporter TAR 1.0 User Manual

Page 13

6 T

hreaT

nalysis

eporTer

uick

TarT

uide

A. Remove the plastic wrapping from the left and

right ears.

B. On one side of the chassis (left or right), un-

screw the inner rail from the chassis.

C. Slide the loosened inner rail slightly backwards

to release it from the clips at the side of the

chassis, and then lay it down beside the chas-

sis, with the inside of the rail facing up.

D. On the inner rail that is still attached to the

chassis, insert the bezel pin into the bottom

hole of the ear. Be sure the pin is pushed all

the way in so that it is flush against the ear.

E. Take up the free end of the bezel and also the

loosened inner rail.