Yamaha MCR-E810 - Manual (Page 58)

54
En
Configuring the DVD Player Settings (Setup Menu)
VIDEO
SETUP PAGE
*2
PROGRESSIVE *4 When connecting the DVD player to a progressive scan compatible TV using a
component video connection, you can enjoy high-quality DVD video with the
progressive scan mode. (Default: OFF)
ON:
Enables the progressive scan.
OFF:
Disables the progressive scan.
PICTURE SETTING You can select the picture color setting from three predefined sets or configure in
detail. (Default: STANDARD)
STANDARD:
Uses standard TV picture settings.
BRIGHT:
Makes the TV picture brighter.
SOFT:
Makes the TV picture softer.
PERSONAL:
You can adjust Brightness, Contrast, Tint and Color (saturation) individually. (Press
or to select an item, press or to adjust the parameter, then press
ENTER to confirm the adjustment.)
COMPONENT
(U.K. and Europe models
only) You can switch the jack (terminal) at which the component video signals are output
between the COMPONENT jacks and AV terminal. (Default: RGB)
YUV:
Select this if you connect the TV to the COMPONENT jacks.
RGB:
Select this if you connect the TV to the AV terminal (scart).
BLACK LEVEL
(U.S.A. and Canada models
only) You can set the black level to improve color contrast during disc playback. This setting
is effective only when “TV TYPE” is set to “NTSC”. (Default: OFF)
ON:
Select this to enhance the black level.
OFF:
Select this for the standard black level setting.
CLOSED CAPTION
(U.S.A. and Canada models
only) Closed captions are data hidden in the video signals of specific discs, and are invisible
without the use of a special decorder. The difference between subtitles and captions is
that subtitles are intended for hearing persons and captions are for the hearing
impaired. Subtitles rarely show all of the audio. For example, captions show sound
effects (e.g., “phone ringing” and “footsteps”), while subtitles do not. Before you
select this function, please ensure that the disc contains closed caption information
and your TV set also supports this funcion. (Default: OFF)
ON:
Enables the closed caption function.
OFF:
Disables the closed caption function.
Page Menu Submenu Parameter
*2 The video settings of your TV also affect the display image. Make sure you configure the video settings of your TV as well as these
settings.
*4 The progressive scan mode is only available if you connect the player to a progressive scan compatible TV using a component video
connection. For U.K. and Europe models, “PROGRESSIVE” is available only when you connect a TV with a component video
connection and “COMPONENT” is set to “YUV”.
To set this parameter to “OFF” without using the Setup menu, open the disk tray, press on the remote control and then press ANGLE.