Yamaha DPX-530 - Manual (Page 11)

7
◆
Operational range
• Keep the remote control sensor out of direct sunlight or fluorescent
lamp light.
• Keep the remote control sensor at least 2 m away from fluorescent
lamps. Otherwise, the remote control may malfunction.
• If there is an inverter-operated fluorescent lamp near the remote
control, the remote control operation may become unstable. On this
occasion, stick a commercially available protection sticker on one
of the sensors that is closer to the fluorescent lamp.
When operating the remote control, keep the distance from the remote
control to the projector via the screen within about 5 m. The operable
range of the remote control, however, depends on the characteristics
of the screen.
◆
Reception angle
Vertical directions
Vertical directions (ceiling mount)
30˚ 30˚
30˚ 30˚
AC IN
Front of projector Rear of projector
Operate the remote
control within a distance
of 10 m from the
projector, pointing the
light beam at the remote
control sensor (front or
rear) of the projector.
20˚
10˚
20˚
10˚
20 20˚ 20 20˚
Using the remote control 3