Yamaha F10 - Manual (Page 59)

ENGLISH
Message List (F01)
F11/F01 Owner’s Manual
59
Message List (F01)
In this chart, the comments are divided into three different parts: The initial sentence explains the meaning of the mes-
sage, while the “•” mark indicates the underlying problem and the “
→ ” mark indicates the possible solution.
Message Comment
C L r Initializing to the normal settings (factory defaults).
c o n Displayed when Musicsoft Downloader is started on a computer connected to the instrument.
When this message appears, you cannot operate the instrument.
E 0 1 Indicates failure in accessing the USB flash memory or media.
→Use another USB flash memory or media.
E 0 2 Indicates that the song data cannot be properly loaded.
E n d Displayed when the current operation is completed.
E r r Displayed when the MIDI/USB cable is disconnected while starting Musicsoft Downloader on a computer connected
to the instrument.
F C L Indicates that internal memory has been cleaned up. The backup data in internal memory of the instrument and
recorded performance are cleared, because the power has been turned off before the song save or load operations
were completed.
CAUTION
Do not turn off the power of the instrument when “FCL” appears in the display. Doing so may cause the instrument to
malfunction.
F U L Displayed when the total amount of files has become too large.
Displayed when internal memory is full.
Displayed when the media is full.
L o d Displayed when a protected song is loading.
n y Confirms whether each operation is executed or not.
n – y Prompts you to confirm or cancel the overwrite operation.
P r o Indicates that the media is protected.