Yamaha F10 - Manual (Page 16)

F11/F01 Owner’s Manual
16
ENGLISH
Before Using the F11/F01
Connecting the Power Cord (F01)
Carefully read the following instructions and warnings before connecting the power cord.
1. Connect the supplied power cord to the [AC INLET] connector on the instrument’s rear panel. For an illustration of the
location of the [AC INLET] connector, see “Panel Controls and Terminals” (page 10).
2. Connect the other end of the power cord to an AC outlet. Make sure your F01 meets the voltage requirement for the
country or region in which it is being used.
In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.
WARNING
Make sure your F01 is rated for the AC voltage supplied in the area in which it is to be used (as listed
on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to the inter-
nal circuitry and may even pose a shock hazard!
WARNING
Use only the AC power cord supplied with the F01. If the supplied cord is lost or damaged and needs
to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire
and shock hazard!
[AC INLET] connector
(The shape of plug differs
depending on your particular
locale.)