Yamaha PJP-50R - Manual (Page 32)

27
Hierarchical Connection of Multiple ProjectPhone (Cascade Connection)
CONF
IGUR
A
T
IO
NS
English
First configure the setting of the cascade server unit, and
then configure the settings of the cascade client units.
■ Setup of the cascade server
1
Press repeatedly until the initial display
appears.
2
Press .
The menu screen appears.
3
Press or to select “Settings”, and then
press .
The “Settings” menu appears.
4
Press or to select “Network Settings”,
and then press
.
The “Network Settings” menu appears.
5
Press or to select “Connection Mode”,
and then press
.
The “Connection Mode” menu appears.
6
Press or to select “Cascade Server”, and
then press
.
The settings are saved.
Return to the initial display and check that is
displayed at the top of the display.
■ Setup of the cascade clients
Follow the procedure in “Setup of the cascade server”
above and select “Cascade Client” in step 6.
After completing the setting, return to the initial display
and check that
is displayed at the top of the display.
Configuring the cascade settings
3. Online
2. Call History
1. Settings
Menu
3. Sound Settings
2. Phone
1. Network Settings
Settings
5. DNS Server
4. Default Gateway
6. Connection Mode
Network Settings
3. Cscd Client
2. Cscd Server
1. Mesh
Connection Mode