Calling another unit by dialing the user id, Display in sip server operation – Yamaha PJP-50R User Manual
Page 30
25
Using the SIP Server
CONF
IGUR
A
T
IO
NS
English
■ Calling another unit by dialing the user
ID
You can call the other party by dialing the user ID if it
consists of only the numbers.
Example:
SIP address of this unit is [email protected],
and the other party is [email protected]
You can call the other party by simply dialing “201”.
• You can call only the destination which belongs to the same
domain as this unit.
• If you want to call another party which belongs to another
domain, register its SIP address in the address book beforehand
and call by using the address book.
• The prefix is not set by default. Simply enter the IP extension
number. But it is also permitted to set a prefix. See “Setting the
prefix” (page 15) for details.
Initial display
The SIP address of this unit is displayed in addition to the
information usually displayed.
Display during a call
The SIP addresses of this unit and other units are
displayed during the call.
Other displayed information and speaker modes are
identical to those in calls using the IP address. See page 7
in the “Basic Operation Guide” (a separate manual) for
details.
Notes
Display in SIP server operation
Menu
:Address
IP: 192.168.0.10
[email protected]...
2006.05. 15 09: 48: 20
Lights up
when using the SIP server
IP address of this unit
SIP address of this unit
Menu
:Address
SIP address of the destination unit