Yamaha PJP-50R - Manual (Page 16)

Preparation Procedure
11
English
INST
ALL
A
T
ION
After completing the settings, follow the procedure below to install this unit in the actual place, such as a conference
room.
■ About the installation environment
The speakers of this unit are on the bottom panel facing down. Place this unit horizontally on a desktop without placing
any object below this unit. If the system is unstable because the tabletop or desktop is not flat, adjust the height of the feet
using the adjusters provided at the bottom.
■ Position of the talkers
This unit is capable of 360° audio pickup when ZONE is set for the microphone mode. The pickup area depends on the
operation environment and settting. Refer to “Selecting the audio pickup area (microphone mode)” (page 16) for details.
Step 3: Installing this unit in the conference room
MIC MUTE
VOL
4 7 0
8 5
2 6 3
9
#
1
HOOK /STANDBY