Optiview Enterprise Series User Manual
Page 25
- 24 -
3. Choosing the Operation Mode
This device can be configured as a Bridge or Access Point. The default IP address
of the device is 192.168.1.1 in Bridge mode. This will describe the steps to
switch from Access Point to Bridge.
The customer can always change these entire configurations in order to suit their
own local network setup. All the settings and examples shown here are for initial
setup only and must not be assumed to be the final and actual settings in order for
the device to work. Please consult your own local network staff for network setup
details. Optiview does not provide detailed technical support to configure your own
local/private network.
4. Wireless Access Point/Bridge Router Mode: Web configuration