Radio Shack PRO-2067 - Manual (Page 43)

43
OPEN AND CLOSED MODES
When set to the open mode, the scanner only uses the ID list to look up ID text tags
and stops on any ID code.
When set to the closed mode, the scanner stops only on sig-
nals that have an ID code which is found in the ID list for the
bank.
Note: When you select a channel manually, any transmis-
sion opens squelch, regardless of the current mode.
The open or closed mode is set in each channel storage bank. + or – appears un-
der the channel storage bank’s number while scanning. Or, the status display
shows the
OPEN/CLOSED mode at the top line while the scanner is in manual
mode or while the scanner is receiving a signal during scanning.
When no ID code is programmed into the scanner, it receives the signal in PL,
DPL, LTR, MOT, or ED mode.
Changing the Open/Closed Mode
1. Press MAN .
2. Press FUNC then ▲ or ▼ to select the channel-storage bank.
3. Press FUNC then 2 . Bank OPEN or Bank CLOSED appears.
After that message disappears, the 10th right most digit at the top of the line of
the display changes from
+ to – or vice versa.
4. Repeat Steps 2–3 for each bank.
Mode Open Closed
PL and DPL Accepts any PL and DPL. Accepts only the PL or DPL stored
in the channel.
MOT/ED/LTR Stops on any transmission. If the
ID is stored, displays the text tag,
otherwise displays the talk group
ID. Only stops on transmission if the
ID is stored. Displays the text tag.
Closed Mode
20-196a.fm Page 43 Friday, June 2, 2000 3:48 PM