Radio Shack PRO-2067 - Manual (Page 35)

35
CHANGING THE
DISPLAY CONTRAST
1. Press MAN .
2. Press FUNC then 9 . Use Up/
Down keys to set con-
trast. appears on the display.
3. Press ▲ or ▼ to select the desired
contrast.
4. Press ENTER to store the setting.
CLONING
PROGRAMMED DATA
FROM SCANNER TO
SCANNER
You can transfer the programmed
data to and from another RadioShack
Cat. No. 20-196 or Cat. No. 20-522
scanner using the supplied clone ca-
ble. To clone the data, follow these
steps.
1. Turn on both scanners.
2. Connect the supplied clone cable
to each scanner’s PC/IF jack.
CLONE MODE UP to send,
remove
cable to exit
appears.
3. Press ▲ . Confirm send
data? 1=Yes Press other
key for No. appears.
4. Press 1 to send the data to the
other unit or press any other key
to cancel the operation.
The scanner sends the data. To exit
the clone mode, remove the cable.
20-196a.fm Page 35 Friday, June 2, 2000 3:48 PM