Nortel Networks Remote Gateway 50 - Manual (Page 162)

Page 162 of 258 Alternative Call Routing for Network Bandwidth Management
553-3001-207 Standard 2.00 January 2006
Maintenance
Command Line Interface maintenance
LD 117 - Enable and disable Alternative Call Routing for NBWM for a zone.
Command Description
ENL ZALT Enable Alternative Call Routing for Bandwidth Management for
zone specified.
DIS ZALT Disable Alternative Call Routing for Bandwidth Management for
zone specified.
ENL ZBR [ALL] [LOC][ESA][TIM][ALT] Enable features for the branch office zone. If you
do not input features, then all are enabled.
DIS ZBR [ALL] [LOC][ESA][TIM][ALT] Disable features for the branch office zone. If you do not
input features, then all are disabled.
Note: The system responds with ok, if operation is successful.
LD 117 - Change and Print Zone Alarm Suppression Time Interval.
Command Description
CHG ZAST
Change Suppression Time Interval for QoS alarms related to
Alternative Call Routing for NBWM feature for zone specified.
Time Interval is measured in seconds from the time the last alarm
was printed.
Default is 0. Range is 0 - 3600 seconds.
PRT ZAST Print Suppression Time Interval for QoS alarms related to
Alternative Call Routing for NBWM feature for zone specified.
No entry for zone number results in printout for all zones.