Panasonic PV-HS2000 - Manual (Page 13)

13
NOTES
• Leave the yellow video cable unattached on your satellite
receiver, the Hard Disk Recorder and television.
• Refer to your TV or satellite receiver owner’s manual for more
information on connecting to these components.
Connecting a Satellite
Receiver to the Hard Disk
Recorder (Using S-Video)
1. Connect the incoming television signal to the IN jack
on your satellite receiver.
2. Connect the red and white Audio plugs of an A/V
cable from the AUDIO OUT jacks on your satellite
receiver to the LINE 2 INPUT jacks on the Hard Disk
Recorder, matching like colors.
3. Connect an S-Video cable from the S-VIDEO OUT
jack on your satellite receiver to the S-VIDEO IN jack
on the Hard Disk Recorder.
4. Connect the red and white Audio plugs of an A/V
cable from the LINE 2 OUTPUT jacks on the Hard
Disk Recorder to the AUDIO IN jacks on your
television, matching like colors.
6. Connect an S-Video cable from the S-VIDEO OUT
jack on the Hard Disk Recorder to the S-VIDEO IN
jack on your television.
7. Attach the satellite receiver controller. See “Satellite
Receiver and Cable Box Controllers” on page 10.
8. Follow the C ~ E instructions on page 9 for telephone
connection, AC power connection, and setup.
Connecting a Satellite Receiver
and A/V Receiver to the Hard
Disk Recorder (Using S-Video)
1. Connect the incoming television signal to the IN jack
on your satellite receiver.
2. Connect an A/V cable from the AUDIO OUT jacks on
your satellite receiver to the LINE 2 INPUT jacks on
the Hard Disk Recorder, matching like colors.
3. Connect an S-Video cable from the S-VIDEO OUT
jack on your satellite receiver to the S-VIDEO IN jack
on the Hard Disk Recorder.
4. Connect the Audio cable from the AUDIO OUT jacks
on your A/V receiver to the speakers. Then, connect
the S-Video cable from MONITOR OUT jack on your
A/V receiver to the S-VIDEO IN jack on your
television. (Note: If you do not have separate
speakers, see step 4 on page 12.)
5. Connect an S-Video cable from the S-VIDEO OUT
jack on the Hard Disk Recorder to the S-VIDEO IN
jack on your A/V receiver.
6. Connect an A/V cable from the AUDIO OUT jacks on
the Hard Disk Recorder to the IN jacks on your A/V
receiver, matching like colors.
7. Attach the satellite receiver controller. See “Satellite
Receiver and Cable Box Controllers” on page 10.
8. Follow the C ~ E instructions on page 9 for telephone
connection, AC power connection, and setup.
• Refer to your TV, satellite receiver, or A/V receiver owner’s
manual for more information on connecting to these components.
NOTE
AUDIO VIDEO R L
VHF/UHF
IN
S-VIDEO
AUDIO
INPUT OUTPUT
ANT/CATV
VIDEO
S-VIDEO
R L AUDIO VIDEO R L
IN S-VIDEO OUT IN TEL LINE AC-IN
SERIAL CONTROL IR BLASTER PORT
S-VIDEO
AUDIO VIDEO R L IN
SERIAL
VHF/UHF IN
VHF/UHF OUT
IN
LINE
1
2
TV
Satellite Receiver
Hard Disk Recorder
TV
Hard Disk Recorder
A/V Receiver
Satellite Receiver
OR
OR
PanaHDR P01-.p65 00/11/28, 14:28 13