Panasonic PV-V4525S User Manual

Page 8

Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company (“PSC”),
Division of Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, Carolina,
Puerto Rico 00985

Printed in Indonesia

LSQT0864 A

S1104-1124

Power Indicator
Lights up when power is on.

Clock/ Status/ Channel/ Speed Display
Displays current time. Briefly displays VCR
status when you press a function button,
channel number or “L1” or “L2” when you select
channel or line input, and recording speed when
you press SPEED.

Multi Function Display (FRONT DISPLAY)

Timer Indicator
Lights up when the VCR is set for a Timer
Recording, or when One Touch Recording
(OTR) is used.
Flashes when a Timer Recording is set, but
a tape has not been inserted into the VCR.

Location of Controls/ Reset All VCR Memory Functions

- 8 -

Note to CABLE system installer

This reminder is provided to call the CABLE system installer’s attention to Article 820-40 of the NEC in USA
(and to the Canadian Electrical Code in Canada) that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.

Rear View of the VCR

VHF/UHF Antenna
Input Terminal

VHF/UHF Antenna
Output Terminal

Audio Output
Connector (L/R)

Audio Input
Connector (L/R)

AC Power Plug
While plugged into an AC outlet, the
VCR consumes 0.9 W of electrical
power in off condition.

•

Video Input
Connector

•

Video Output
Connector

Returns to factory setting. Use if relocating VCR, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the VCR.

Reset All VCR Memory Functions

Press and hold both PLAY and CHANNEL
on the VCR for more than 5 seconds.
• The power shuts off.

Turn VCR Power on.

Perform “Initial Setup (Ready to Play)” on
page 4.