Panasonic PV-V4525S - Manual (Page 6)

Timer Recording
1
Press PROG* to display program screen.
Press PROG to end programming.
2
3) Set remaining items,
press to set START/ STOP times, CH (channel) or
LINE input (p. 9 of Advanced Operations book), and
tape speed (p. 3).
Then press
to select.
1) Press .
2) Set record DATE,
press to select:
1~31= one time,
or DAILY= Monday~Friday,
or WEEKLY= same time
each week (see right).
3 To Enter More Programs
Press
to select and press to set an unused program.
Then repeat step 2. Or, press PROG to exit.
Timer Recording
Example
Today
Press to select
desired program.
4
Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)
(Recording is not in progress)
a
Press PROG
to display program screen.
b
c
To Replace program...
d
Press PROG to end the programming.
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must be set to the
Cable Box output channel and your Cable Box must be manually set to the desired channel.
The Cable Box must be left on.
• If a power interruption occurs while programming the timer, the timer program(s) may be canceled.
If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears on-screen,
please re-enter the timer programs.
Important notes when using DSS receiver
• When recording programs via DSS receiver, DSS receiver must be left on.
• When recording programs via an antenna or cable, DSS receiver must be turned off.
Review, Replace, or Clear Program
1) Press to display.
2) Repeat Step 2
(above) to set new
programs.
Press ADD/DLT.
or
To Clear program...
Press POWER and then STOP within 10
seconds to cancel the Timer Recording.
(The TIMER indicator goes out on Multi Function
Display.)
Cancel a Timer Recording
(Recording is in progress)
- 6 -
Notes
P DT START STOP CH SPD
1 13 2:00p 3:20p 02 SLP
2 14 7:00p 7:30p 10 SP
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SELECT : SET :
EXIT : PROG
P DT START STOP CH SPD
1 13 2:00p 3:20p 02 SLP
2 -- --:-- --:-- -- --
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
CANCEL : ADD/DLT
SELECT :
SET :
END : PROG
SET COMPLETED
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2 -- --:-- --:-- -- --
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SELECT : SET :
END : PROG
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2 14 7:00p 7:30p 10 SP
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SELECT : SET :
END : PROG
P DT START STOP CH SPD
1 13 2:00p 3:20p 02 SLP
2 14 7:00p 7:30p 10 SP
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
CANCEL : ADD/DLT
SELECT :
SET :
END : PROG