Superimpose screen – Panasonic AJ-HD1700PE User Manual
Page 113
113
Display position
The position of the characters superimposed on the
display can be changed using
(C HPOS) and
(C VPOS) on the
dial.
F3
F2
Superimpose screen
The control signals, time code, etc. are displayed on
this screen using abbreviations.
TCR
22
:
22
:
22
:
22
TV monitor
TCR
22
:
22
:
22
:
22
TV monitor
TCR
22
:
22
:
22
:
22
TV monitor
Abbreviations
CTL: Control signal count value
TCR: Time code data recorded in the SBC area
TCR.: Time code data recorded in the VAUX area
UBR: User’s bit data recorded in the SBC area
UBR.: User’s bit data recorded in the VAUX area
TCG: Time code data of the time code generator
UBG: User’s bit data of the time code generator
Operation mode
The VTR’s operation mode can also be displayed
using
(DISPLY) on the
F4
TCR
22
:
22
:
22
:
22
STOP
TV monitor
VTR operation mode
Characters displayed
The background of the characters superimposed on
the display screen can be changed using
(C
TYPE) on the
F5
TCR
22
:
22
:
22
:
22
TV monitor
TCR
22
:
22
:
22
:
22
TV monitor
system menu item No.25 (SYSTEM FREQ) setting,
the time code and other information superimposed on
the MONITOR and VIDEO OUT3 connectors are not
displayed.
2
R], [T
2
R.], [U
2
R] or [U
2
R.] is displayed when the
data has not been read correctly from the tape.