beautypg.com
64
Function menus
(continued)
The current setting information, including the SETUP menucontents, can be provided with titles and either saved in orloaded from the backup memory in one of 4 variations.
When
(FILE) is pressed while the
button is held
down on the
z This VTR comes with VTR MEMORY
for storing the
current settings (*) and VTR MEMORY
to
for
storing these settings as a backup.
z Each VTR MEMORY can be provided with a title.z Data can be saved and loaded and titles can be copied
between VTR MEMORY
and VTR MEMORY
.
z The file locking facility for preventing data from being
overwritten can be engaged for VTR MEMORY
*
The term “settings” used here refers to all the settings on the setup menus excluding the SYSTEM menu, what has been registered in the PF1 and PF2 menu items, and the contents of some of the function buttons.
Settings
1
Selecting the memory targetPress the
button.
The operation target switches alternately between VTRMEMORY
2
Selecting the operation file in the selected memoryThe number of the currently selected file is highlightedon the display. When the ADJ dial is turned, thehighlighting moves to the left or right, enabling operationfiles to be selected.
3
Transferring files between memoriesAfter selecting the operation file, press
(LOAD).
The contents of files selected in VTR MEMORY
can be transferred to VTR MEMORY
is selected and
(LOAD) is pressed, the
factory setting mode is established. Alternatively, when
(SAVE) is pressed, the contents
of a file in VTR MEMORY
can be transferred to a file
selected in VTR MEMORY
(The titles are also transferred at the same time.)
4
Editing the title of the selected filePress the ADJ dial after selecting the operation file.The first digit of the title display area is highlighted, andthe file title can be edited.z To input a number, press the number keys.z To input letters, tap the numbers keys until the letter
to be input appears while holding down the
z More than one letter is allocated to each number key.z Turn the ADJ dial to move from one digit to the next in
the title display area.
z To enter the title, press the ADJ dial again.
z When the display screen has been switched or the
button has been pressed during title editing, the
editing enable status is canceled, and the setting becomes invalid.
z A space can be input by pressing the
button and
Name of memory
area
Initial title (up to 8
characters)
VTR MEMORY C
CURRENT
VTR MEMORY 1
USER1
VTR MEMORY 2
USER2
VTR MEMORY 3
USER3
VTR MEMORY 4
USER4
F1
F
SHIFT
F2
F3
F4
F5
F6
Memory selection cursor
Memory name
File status (VTR)
File title (VTR)
File number (VTR)
C
