Panasonic AJ-HD1800P - Manual (Page 38)

38
Function menus
The function menus are used to set the functions which are frequently used.
The function menus are selected directly using the direct menu buttons on the front panel.
General description
General menus
,
The most basic settings for recording, playback and TC
operations are set on these menu screens.
,
The basic input/output settings for the video signals are
performed and, moreover, the level of the HD output
signals can also be adjusted on these menu screens.
, ,
The basic input/output settings for the audio signals are
performed on these menu screens.
,
The TC-related settings are performed on these menu
screens.
The settings for superimposing time codes on the display
can also be performed on these menu screens.
, , ,
Up to 24 frequently used menu items which have been
registered can be used on these menu screens.
,
A maximum of 60 cue points can be set on these menu
screens. In the PAGE mode, 10 pages with 6 cue points
on each page are provided so that the cue points can be
managed on a page-by-page basis.
,
Information such as Warnings/Hour meter/UMID can be
confirmed.
On the SHIFT window, error log files can be confirmed,
deleted, and stored or retrieved from an SD memory card.
It is possible to move the operation (adjusting, storing, or
retrieving from internal memory and an SD memory card)
window related to the SYSTEM and the SETUP menu.
The ASSEMBLE editing mode is selected on this menu
screen.
The INSERT editing mode and editing channels are
selected on this menu screen.
Special menus
<>
The SYSTEM menu is displayed on-screen, enabling
various adjustments to be made.
<>
The SETUP menu is displayed on-screen, enabling
various adjustments to be made.
<>
The current setting information, including the SETUP
menu contents, can be provided with titles and either
saved in or loaded from the backup memory in one of 4
variations.
<>, <>
<>, <>
The SETUP menu items which can be registered are
displayed on-screen, and they can be registered into or
deleted from the function buttons.
<>
Up to eight kinds of current settings, including the
contents of the SETUP menu with titles, can be stored or
retrieved from an SD memory card.
<>
Up to eight kinds of the error logs with titles can be stored
or retrieved from an SD memory card.
<>
Up to eight kinds of MULTI CUE menus with titles can be
stored or retrieved from an SD memory card.
<<50P IN ASSIGN>>, <<50P OUT ASSIGN>>
Using the front panel controls and on-screen menus, the
functions are registered into the input pins of the parallel
remote (50PIN) connector and the statuses are registered
into its output pins.