Lucent Technologies Host-Based Controller Modem AT - Manual (Page 58)

Host-Based Controller Modem Data Addendum
AT Command Set June 15, 1998
V.25ter AT Commands (continued)
Lucent Technologies Inc. Version 1.0 58
, , and
+A8I: This indication is used by an
answering DCE, if +A8E, !=0,
to indicate detection of a V.8 CI
signal, and report the recovered
Call Function octet(s). Value
is a hexadecimal code octet
that can take values as shown
above in +A8E command.
+A8M=coded CM or JM octet
string> Coded CM
or JM octet Refer to V.8 document for coding. Directs the DCE to send a V.8 CM
or JM signal using the specified
hexadecimal coded string.
+A8A: 1 Indicates V.8 ANSam signal
flags
0 Indicated no ANSam signal detected This indication is used by a calling
DCE, if +A8E #0, to indicate
detection of an answering signal.