Lucent Technologies Host-Based Controller Modem AT - Manual (Page 22)

Host-Based Controller Modem Data Addendum
AT Command Set June 15, 1998
AT Command Reference (continued)
Lucent Technologies Inc. Version 1.0 22
The table below shows the possible values:
“AT-V90=X” Downstream Rate
0 V.90 disabled
1 Auto Rate (default)
2 28000 kbit/s
3 29333 kbit/s
4 30666 kbit/s
5 32000 kbit/s
6 33333 kbit/s
7 34666 kbit/s
8 36000 kbit/s
9 37333 kbit/s
10 38666 kbit/s
11 40000 kbit/s
12 41333 kbit/s
13 42666 kbit/s
14 44000 kbit/s
15 45333 kbit/s
16 46666 kbit/s
17 48000 kbit/s
18 49333 kbit/s
19 50666 kbit/s
20 52000 kbit/s
21 53333 kbit/s
%B View Numbers in Blacklist
If blacklisting is in effect, this command displays the numbers for which the last call attempted in the past two
hours failed. The ERROR result code appears in countries that do not require blacklisting.