Kyocera Domino S1310 User Manual
Kyocera Mobile Phones
Table of contents
Document Outline
- Table of Contents
- 1 Get Started
- Phone Battery
- Install the Battery
- 1. Hold the phone face down.
- 2. Find the notch directly below the back cover. It is square. Using your thumbnail, pry the cover up from the bottom to remove.
- 3. Place the battery in the battery casing with the metal contacts facing toward the top of the phone. The metal contacts of the battery must make contact with the metal contacts of the battery casing.
- 4. Replace the battery cover by sliding the notches into the openings on the top of the battery casing.
- 5. Snap the cover into place.
- Charge the Battery
- Battery Safety Guidelines
- Common Causes of Battery Drain
- Install the Battery
- Phone Overview
- Get to Know Your Phone
- 1. Home screen.
- 2. Volume key raises or lowers ringer volume.
- 3. Left softkey selects items that appear on the lower left of the display. At the home screen, you can select Menu.
- 4. Speakerphone key activates the speakerphone and answers incoming calls.
- 5. Navigation key scrolls through lists and text entry fields and accesses the following shortcuts from the home screen.
- 6. Send key starts or answers a call. Press once to display the All Calls list and twice to redial the last number dialed.
- 7. Keypad for entering numbers, letters, or symbols.
- 8. * Shift key changes the text mode in text entry. Press and hold to lock the keypad.
- 9. Jack for a hands-free headset (sold separately).
- 10. Jack for AC adapter (included) and microUSB cable (sold separately).
- 11. Right softkey selects items that appear on the lower right of the display. At the home screen, you can select @metro.
- 12. OK key selects a menu item or option. At the home screen, press the OK key to launch the icon highlighted on the application bar. Use the Navigation key to choose an icon to highlight.
- 13. Back key erases characters in text entry and returns you to the previous screen when navigating through menus.
- 14. End key turns the phone on and off, ends a call or browser session, and returns you to the home screen.
- 15. # Space key enters a space during text entry. Press and hold to activate or deactivate vibrate mode.
- 16. 0 Next key cycles through word choices during text entry.
- MetroPCS Applications
- Screen Icons
- Get to Know Your Phone
- Main Menu
- Guide Conventions
- Phone Battery
- 2 Call Features
- 3 Text Entry
- Text Entry Modes
- 1. Characters remaining that you can type. Allowed message length can vary depending on your service.
- 2. Text entry fields.
- 3. Current capitalization setting.
- 4. Current text entry mode.
- Enter Numbers with Number Keypad
- Enter Letters with Number Keypad
- Rapid Entry with Number Keypad
- Enter Symbols with Number Keypad
- Text Entry Quick Reference
- Text Entry Modes
- 4 Recent Calls
- Recent Calls Menu
- Work with Call Lists
- Erase Call List Records
- Work with Call Timers
- View Data Counter
- 5 Contacts
- Contacts Menu
- Launch Metro411
- Access Contacts
- Add Contacts
- Add Contacts from Home Screen
- 1. From the home screen, enter a phone number to save (include the area code).
- 2. Select Save > Save New Contact.
- 3. Enter a name for the contact.
- 4. Enter additional phone numbers, email addresses, and other contact details. (Scroll up or down to move through the contact fields.)
- 5. When done, select Save.
- Add Contacts from Contacts Menu
- Add a Code or Extension
- Add Contacts from Home Screen
- Use Contacts
- Customize Contacts
- Erase Contacts
- Contact Groups
- View Groups
- Create a New Group
- Send Text Messages to Groups
- Send Multimedia Messages to Groups
- Add or Remove Contacts from Groups
- 1. From Groups, highlight a group.
- 2. Select Options > Edit.
- 3. If you are modifying a group you created, select Next. Otherwise, go to the next step.
- 4. Select contacts from the list provided. A checkmark appears next to each contact in the group. Press the OK key to add or remove checkmarks.
- 5. When finished, select Done.
- Assign Ringers to Groups
- Assign Message Tones to Groups
- Assign Pictures to Groups
- Send a Group vCard
- Create a Message Group
- Erase a Group
- Erase All Groups
- Speed Dial List
- Check Contacts
- 6 Messaging
- Messaging Menu
- Send Email
- Send Instant Messages
- Send Messages
- Create a Text Message
- Create a Multimedia Message
- 1. From New Pic Msg, enter a recipient’s phone number or email address. (Select Options to access contacts, groups or recently used addresses. Scroll down to move to the next field when done.)
- 2. Repeat the first step for CC and BCC, if needed.
- 3. Enter a subject.
- 4. Enter a message.
- 5. Attach an image file. (Select Options to access more features.)
- 6. Attach a sound file. (Select Options to access more features.)
- 7. When done, select Send.
- Receive Calls while Creating Messages
- Enter Message Recipients
- Save Messages to Drafts
- Complete Messages in Drafts
- Use Preset Text
- Attaching Files to Messages
- Preview Messages
- Set Individual Message Settings
- Request a Message Receipt
- Set Message Priority
- Change the Callback Number
- Send Messages Later
- 1. When entering a message, select Options > Msg Settings > Send Later.
- 2. Select Immediate or Set Time to set a specific time to send the message.
- 3. Press the OK key to change the time.
- 4. Select Next.
- 5. Press the OK key to change the date.
- 6. Select Done.
- 7. Complete your message. Your phone will save the message and send it later.
- Set the Validity Period
- 1. When entering a message, select Options > Msg Settings > Validity Period.
- 2. Select Set Time to set how long to keep your message valid before removing it from the phone if not sent.
- 3. Press the OK key to change the time.
- 4. Select Next.
- 5. Press the OK key to change the date.
- 6. Select Done.
- 7. Complete your message.
- Set the Slide Interval
- Set CC and BCC Fields
- Request a Message Read Receipt
- Manage Received Messages
- Reply to Text Messages
- Reply to Multimedia Messages (with Auto Retrieve)
- Reply to Multimedia Messages (with Prompt)
- 1. At the download notification, select Yes (to download the message) or Options (to retrieve it later or erase it without downloading).
- 2. At the message notification, select View (to view the message) or Later (to check it later).
- 3. Select Reply or Options > Reply if the message has more than one slide.
- 4. Complete your message and select Send.
- Forward Messages
- Reply to all Recipients
- Reply with a Copy of the Message
- Call Sender
- Save Received Messages
- View Recipients
- View Sender Information
- Lock Messages
- Sort Messages in Inbox
- Go to Web Addresses in Messages
- Manage Attached Files
- Manage Voicemail
- Manage Sent Messages
- Manage Web Alerts
- Message Settings
- Set Message Alerts
- Set Page Alerts
- Set Voicemail Alerts
- Set Message List View
- Set your Signature
- Edit Preset Messages
- Enable Auto Retrieve
- Enable CC/BCC Fields
- Set Callback Number
- Enable Save to Sent
- Enable Auto-Erase
- Set Default Text
- Request Text Message Receipts
- Request Multimedia Message Receipts
- Set your Voicemail Number
- Erase Recent List
- Request Text Message Read Receipts
- Set Multimedia Message Response
- Message Groups
- View Message Groups List
- Create a New Message Group
- Send Text Messages to Message Groups
- Send Multimedia Messages to Message Groups
- Add Contacts to Message Groups
- 1. From Message Groups, highlight a group.
- 2. Select Options > Edit.
- 3. If you are modifying a group you created, select Next. Otherwise, go to the next step.
- 4. Select contacts from the list provided. A checkmark appears next to each contact in the group. Press the OK key to add or remove checkmarks.
- 5. When finished, select Done.
- Assign Message Tone to Message Group
- Send a Message Group vCard
- Erase a Message Group
- Erase Messages
- Check Message Count
- 7 @metro
- How does BREW Work?
- Download an Application
- 1. From @metro, select MobileShop > Catalog. When a connection is made, a list of application types appears.
- 2. Select an application type. A list of applications appears. Long titles scroll left as you highlight them.
- 3. Select an application. A list of usages appears. There may be one or more usages available. Prices are specified for each usage.
- 4. Select a usage for the application. You are prompted to confirm your purchase.
- 5. Select Yes to confirm. The application downloads to your phone. Download times may vary.
- Access Help for @metro
- 8 MetroWEB
- 9 Settings
- Settings Menu
- Bluetooth
- Enable Bluetooth
- Pair with a Device
- 1. Prepare the Bluetooth device (accessory) for pairing as described in the device’s user guide.
- 2. From My Devices, select Find New. Your phone then searches and detects any available Bluetooth devices in the vicinity.
- 3. At the device list, highlight a device and select Add.
- 4. If necessary, enter the password provided with the Bluetooth device and select OK.
- Use Bluetooth Devices
- Change Bluetooth Settings
- Convenience
- Display
- Sounds
- Accessories
- Network
- Security
- 10 Media Gallery
- 11 Phone Info
- 12 Tools
- Tools Menu
- Voice Memo
- Scheduler
- Create an Event
- 1. From Add New Event, enter a name. Scroll down to move to the next field when done.
- 2. Press the OK key to select an event type from the list.
- 3. Press the OK key to change the date, if needed.
- 4. Press the OK key to change the time, if needed.
- 5. Press the OK key to change the duration, if needed.
- 6. Press the OK key to select a priority from the list.
- 7. Press the OK key to select a reminder from the list.
- 8. Press the OK key to select a reminder sound from the list.
- 9. Press the OK key to select During Event to enable silent mode or Off to have normal sounds.
- 10. Press the OK key to select a recurring event from the list, if needed.
- 11. Select Save.
- View Events
- Modify Events
- Erase Events
- Change Scheduler Settings
- Create an Event
- Alarm Clock
- Use Tip Calculator
- Use Calculator
- Use Timer
- Use Stopwatch
- 13 Get Help
- Index