Kawai Professional Stage Piano MP8II - Manual (Page 32)

32
6. MENU
The MENU buttons allow access to the edit parameters in the MP8II. This
collection of settings together with other editable parameters can be stored as
a SETUP. The MP8II provides 256 SETUPs, and all are user programmable.
A SETUP consists of four zones. Each zone can be set as Internal, External or
Both individually. Inside each of the four zones, a multitude of features and
effects can be programmed and combined together into one exciting SETUP.
A total of 256 SETUPs may be programmed in this way.
The menu consists of Internal parameters, External parameters and Common
parameters.
Common parameter affect all zones. If a zone is set as Both, both the Internal
parameters and External parameters are available for the zone.
Use the MENU buttons to scroll through all the different parameters.
In SOUND mode, both the Int Zone parameters and the Common parameters
without the inverse “S(Setup)” icon can be individually stored. (See page43)
The Int Zone parameters can be stored as a SOUND of the MP8II’s 256 SOUNDs.
The Common parameters can be stored as the initial settings in SOUND mode.
Zone parameters (Int)
Mode
Sound Selection
Damper Reso. (Int Piano only)
String Reso. (Int Piano only)
KeyOff Effect (IntPiano only)
Voicing (Int Piano only)
Key Range Hi/Lo
Velocity Switch On/Off
Velocity Switch Value
Velocity Compression
Velocity Offset
Zone Transpose
Volume
Pan
Fine Tune
Damper Pedal On/Off/Hold
Footswitch On/Off
Expression Pedal On/Off
Modulation On/Off
Bender On/Off
Bender Range
Solo On/Off
Solo Mode
Caution:
The edited settings will be erased when the power is turned off, or other
sound is recalled. To save these settings, use the STORE procedure to save
them as a SETUP. (See page43)
Zone parameters (Ext)
Mode
TX Channel
TX PRG # On/Off
PRG #
TX Bank On/Off
Bank Select MSB LSB
Keyboard On/Off
Key Range Hi/Lo
Velocity Switch On/Off
Velocity Switch Value
Velocity Compression
Velocity Offset
Zone Transpose
TX Volume On/Off
Volume
TX Controller On/Off
Pan
Fine Tune
Damper Pedal On/Off
Footswitch On/Off
Expression Pedal On/Off
Modulation On/Off
Bender On/Off
TX Bender Range On/Off
Bender Range
Solo On/Off
Solo Mode
Common parameters
Master Volume
Left Pedal Mode
M.Wheel CC#
Expression Pedal CC#
Footswitch CC#
Temperament
Stretch Tuning