Kawai Professional Stage Piano MP8II - Manual (Page 24)

24
3.8 External Sequencer Start/Stop
You can start and stop the external sequencer connected to the MP8II with SW
button.
First, connect an external sequencer to the MIDI OUT jack on the rear panel of
the MP8II. Make sure that the sequencer is capable to receiving external MIDI
clock and commands. Check the MIDI implementation chart of the sequencer
if the Recognized column of the System Real Time Clock & Commands is marked
“O (yes)”. Consult the owner’s manual of the sequencer on how to set the
sequencer to receive external MIDI clock and commands.
When the SW button is lit the MIDI clock is transmitted
External Sequencer Start: Press the SW button to turn the light on. The display
briefly shows as follows and the external sequencer starts.
External Sequencer Stop: Press the SW button to turn the light off. The display
briefly shows as follows and the external sequencer stops.
Note:
The tempo is controlled by the Metronome tempo of the MP8II. See page18
for details.