Kawai Professional Stage Piano MP8II - Manual (Page 18)

18
2.5 Piano Only
The Piano Only function lets you quickly return the MP8II sounds to the default
settings.
Press the PIANO button and the SOUND SELECT button 1 simultaneously. All
the current settings (except for SYSTEM settings) will go back to original and
only Concert Grand sound can be played on the whole keyboard.
Note:
You may use this function also as a kind of Panic or Reset button. Also it is a
good starting point to create Setups from scratch.
2.6 Metronome
A metronome is available on the MP8II.
Press the STORE and SYSTEM buttons simultaneously to start the metronome.
Press the STORE or SYSTEM button to stop the metronome.
Changing the Tempo/Volume
The display will show as follows.
Use the VALUE buttons to change the tempo.
Use the MENU buttons to change the volume.
Note:
The metronome tempo is also used as MIDI clock tempo to control an external
sequencer. See page24 for details.
2.7 Transpose
When the Transpose function is “ON” the MP8II’s key can be raised or lowered
in half steps. The available range of transposition is 24 semitones, either up or
down.
While holding down the TRANSPOSE button, press any key on the MP8II
keyboard to select a new transposed key. Pressing the F key above middle C
for example will transpose the MP8II UP to the key of F (+5 half steps).
The transpose amount can also be set using the VALUE buttons.
While holding the TRANSPOSE button down, press the VALUE buttons to change
the transpose amount.