Socket Mobile Pentium 4 Full Size PICMG CPU Card IB810 - Manual (Page 45)

BIOS SETUP
IB810 User’s Manual 41
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and
Disabled.
USB Controller
The options for this field are Enabled and Disabled. By default, this field
is set to Enabled.
USB Keyboard Support
The options for this field are Enabled and Disabled. By default, this field
is set to Disabled.
AC97 Audio
The default setting of the AC97 Audio is Auto.
Init Display First
This field allows the system to initialize first the VGA card on chip or the
display on the PCI Slot. By default, the PCI Slot VGA is initialized first.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
Power On Function
This field sets how the system can be powered on from a system off state.
The default setting is Button Only.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the CPU card and you wish to use it. If you install an add-in
FDC or the system has no floppy drive, select Disabled in this field. This
option allows you to select the onboard FDD port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1 3F8/IRQ4
Serial Port 2 2F8/IRQ3
Parallel Port 378H/IRQ7