Sony SPP-A972 - Manual (Page 24)

Basics 24 US
1
Pick up the handset from the
base unit.
2
Press (LINE 1) or (LINE 2) to
select the line.
The corresponding line button
lights up.
“TALK” appears on the display
and the display also shows the
talk time in hours, minutes and
seconds.
You will then hear a dial tone.
The line button on the base unit
double flashes in succession.
If “CHANNEL SEARCHING...”
appears on the display, move
closer to the base unit.
3
Dial the phone number.
4
When you’re done talking, press
(OFF) or replace the handset on
the base unit.
The display and the LINE 1 or
LINE 2 button go off.
Making calls when the headset is connected
When the TL-HD1 headset (not supplied) is connected to the I
(HEADSET) jack, you can talk through the headset.
Precaution
Avoid listening your headset at so loud a volume that extended play might
affect your hearing.
Basics
Making calls
(*TONE)
VOL switch
(HOLD)
I (HEADSET)
jack
(REDIAL/PAUSE)