Socket Mobile 56K Modem Card - Manual (Page 48)

48 | CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP
OPTIONAL: Set up Advanced Networking
Follow the steps below to set up a dial-up connection for a RAS server.
Advanced setup is necessary only if your network does NOT use DHCP
(Dynamic Host Configuration Protocol).
1. Complete the Network Information Form in Appendix B.
2. To enter TCP/IP settings, after completing the wizard to create a new
dial-up connection in Step 5, follow these steps to modify the
connection:
Windows 95/98 —
(a) Right-click on the icon for the connection you just created.
In the pop-up menu, select Properties.
(b) Click on the Server Types tab. Click on the TCP/IP Settings button.
(c) Enter any necessary settings, then click OK.
(d) Click OK again in the main properties screen.
(e) Restart your computer to make sure the changes take effect.
Windows Me —
(a) Right-click on the icon for the connection you just created. In the
pop-up menu, select Properties.
(b) Click on the Networking tab. Click on the TCP/IP Settings button.
(c) Enter any necessary settings, then click OK.
(d) Click OK again in the main properties screen.
(e) Restart your computer to make sure the changes take effect.