Step 4: insert the card – Socket Mobile 56K Modem Card User Manual
Page 37
CHAPTER 3: SETUP FOR CASIO BE-300 | 37
STEP 4: Insert the Card
Note: If you installed Socket’s WhereAreYou? software, you
may want to use it now to set up the modem card for your
country. You must start this process BEFORE inserting the
card. For instructions, go to page
40
Insert the 56K Modem Card into the CompactFlash I/O slot of your
BE-300. Make sure the card is right-side up, with the gray label on top.
Warning! Do NOT insert the card upside down, or damage may occur!
When you insert the card, the Power and Data Status LEDs will blink once
then turn off.
Plug the card
directly into a
CompactFlash
I/O slot.