When the set date and time comes – Sony ICD-UX70 User Manual
Page 28
![background image](/manuals/141323/28/background.png)
ICD-UX70/UX80 GB 3-274-295-12(1)
2
GB
3
Set the alarm date and time.
Press the control key toward
or
to select “DATE,” a day of the week, or
“DAILY,” and then press ENT.
When you select “DATE”:
Set the year, month, day, hour, and
minute in sequence, as described in
“Step 2: Setting the Clock” on page 14,
then press ENT.
When you select a day of the week
or “DAILY”:
Press the control key toward
or
to
set the hour and then press ENT, press
the control key toward
or
to set
the minute and then press ENT.
The setting process is finished and “
”
(alarm indicator) appears in the display
window.
When the set date and time
comes
At the set time, the alarm will sound
for about 10 seconds while “ALARM” is
displayed in the display window and the
selected message will be played back.
When the playback ends, the IC recorder
will stop automatically at the beginning
of that message.
To listen to the same message
again
Press
, and the same message will
be played back from the beginning.
To stop the alarm before the
playback starts
Press
(stop) while the alarm sound is
heard. You can stop the alarm playback
even when the HOLD function is
activated.
To change the alarm setting
Start from step 2 on page 27.
To cancel the alarm setting
Follow steps 1 and 2-
on page 27. In
step 2-
, press the control key toward
or
to select “OFF,” and press ENT. The
alarm will be cancelled and the alarm
indicator will disappear from the display
window.