Sony ICD-UX70 User Manual
Page 17
ICD-UX70/UX80 GB 3-274-295-12(1)
1
GB
B
as
ic O
pe
ra
tio
ns
3
Press
(stop) to stop recording.
The IC recorder stops at the beginning
of the current recording.
Tips
While recording you can lock all the
functions of all the buttons so that you can
prevent inadvertent operations by sliding
the HOLD switch in the direction of the
arrow.
Messages recorded using this IC recorder will
be recorded as MP3 files.
When you purchase the IC recorder, there
are 5 folders already available, and you can
record up to 99 messages in each folder.
Notes
While the operation indicator is flashing or
is lit in red or orange, do not remove the
battery or connect or disconnect the USB AC
adaptor. Doing so may damage the data.
Noise may be recorded if an object, such
as your finger, etc., accidentally rubs or
scratches the IC recorder during recording.
Before making a recording, be sure to check
the remaining battery indicator (page 13).
To avoid replacing battery during a long
recording session, use a USB AC adaptor (not
supplied) (page 56).
The maximum recording time varies if you
record messages in mixed recording mode.
To
Do this
pause
recording*
Press
(record/pause).
During recording pause,
the operation indicator
flashes in red and “
“
flashes in the display
window.
release pause
and resume
recording
Press
(record/pause)
again.
Recording resumes
from that point. (To stop
recording after pausing
recording, press
(stop).)
review the
current
recording
instantly
Press
.
Recording stops and
playback starts from the
beginning of the message
just recorded.
review during
recording
Press and hold
during recording
or recording pause.
Recording stops and you
can search backwards
while listening to fast
playback sound. After you
release
, playback
starts from that point.
* One hour after you pause recording,
recording pause is automatically released
and the IC recorder enters the stop mode.