Sony ICD-UX70 - Manual (Page 20)

ICD-UX70/UX80 GB 3-274-295-12(1)
20
GB
Recording with an
External Microphone
Stereo
microphone
1
Connect an external microphone to
the  (microphone) jack when the
IC recorder is in the stop mode.
“SELECT INPUT” appears in the display
window.
2
Press the control key toward  or
 to select “MIC IN,” and then press
ENT.
3
Speak into the external microphone
and start recording.
The built-in microphone is
automatically cut off.
If the input level is not strong enough,
adjust the microphone sensitivity on
the IC recorder.
When a plug in power type
microphone is connected, power
is automatically supplied to the
microphone from the IC recorder.
Recommended microphones
You can use the Sony ECM-CS10 or ECM-CZ10
electret condenser microphone (not supplied).
