Sony HM-982RW - Manual (Page 73)

73
XXXXXXXXXX
Knowledge section
Preparation section
Application section
Basic section
1 Place a recordable CD-RW disc. 78
2 Press the ERASE key repeatedly until "Erase All ?"
is displayed.
3 Press the SET key.
÷ Ensure that the disc has no scratch or dirt on the surface.
÷ The "CD-RW" indicator should light. If the "FINALIZED
CD-RW" indicator lights, the disc is a finalized disc.
÷ The time until the completion of erasure is displayed.
÷ Do not perform any other operation during erasure.
÷ "Complete" is displayed when erasure completes.
÷ The counts of Skip Track registrations and cancel writing are
also reset.
÷ To abort unfinalization, press the ERASE key or 7 STOP key.
4 Press the ENTER key to start erasure.
Example: To record all tracks in a disc containing 15
tracks
Erasing all tracks
UN FINALIZE D
SKIP PLAY
ERASE
E r a s e
A l l ?
UN FINALIZE D CD -R W
REMAIN
SKIP PLAY
ERASE
C D R
0 : 0 8
Erasure of CD-RW recording
CLEAR
ERASE
SET
ENTER
Select the “CDR” input. Be sure to put the CD recorder in stop mode.
"ERASE" blinks
Blinks
Blinks
UN FINALIZE D
SKIP PLAY
ERASE
E r a s e
O k ?
Blinks
CD -R W
SKIP PLAY
Lights
If the power supply is interrupted by a power failure
or unplugging the power cord during erasure, the
data may be destroyed and become unplayable.
Never unplug the power cord during erasure.
"Erase 15 ?"
"Erase All ?"
Normal display
Each press switches alternately.