Sony HM-982RW - Manual (Page 26)

Playback of CD
26
Preparation section
Basic section
Apprication section
Knowledge section
1. Load a disc.
Do not touch the played surface.
2 2
2. Start playback. (The “CDR” input is selected automatically.)
Playback on CD recorder
CD -R
SINGLE
C D R 0 2
0 : 0 7
CD-R
6
Track No. being played
(Upper line)
Elapsed track playing time
(Lower line)
tape loading mechnism
2 2
1 1
Playback from
desired track
To stop playback
Start playback/
To pause playback
To stop playback
Skipping
tracks To fast forward
and backward
Skipping tracks
To eject
a disc
Start playback/
To pause playback
Time display on CD recorder
The label must be on top.
1 Press CD recorder tray open/close (0) key.
2 Place a disc.
3 Press CD recorder tray open/close (0) key.
÷ No adapter is necessary to play an 8 cm CD.
÷ The CD recorder can play back commercially-available music CDs. Although it can
play CD-R/RW discs which have not been finalized, it cannot play discs containing
other signals than audio signals. It may sometimes be incapable of playing a CD-
R/RW disc recorded with other equipment than this system or a PC.
÷ If the CD-R IN indicator blinks after the tray has been closed, the disc cannot be
ejected.
0
CD-R IN
0
CD-R IN
\
When a non-used disc or a disc which has not been unfinalized is
loaded in the CD recorder, the CD-R IN indicator may sometimes blink
for a while.
"OPC (Optimum Power Control)"
‡
Lights Blinks
The CD-R IN indicator blinks first, then it lights steadily when the disc has
been identified (now the disc is ready for playback).