Sony HM-982RW - Manual (Page 49)

49
Various playback features
Knowledge section
Preparation section
Application section
Basic section
Select the “CD” or “CDR” input. ¢§
Repeated playback
To repeat a disc
1 Confirm that the “PGM” indicator is not lit.
Desired track(s) or disc can be played repeatedly.
To repeat selected tracks
1 Program the desired tracks by performing the
procedure in “Listening in the desired sequence
(Program playback)” until step
3. u
2 Press the REPEAT key repeatedly until “REPEAT”
is displayed.
3 Press the CD 6 key.
2 “REPEAT”
To stop repeated playback
Press the REPEAT key repeatedly until any repeat-
related indicator disappears.
To repeat a single track
1 Confirm that the “PGM” indicator is not lit.
3 “REPEAT ONE”
Press the numeric keys as shown below....
To enter track No. 12 .......... +10, 2
To select track No. 20 ......... +10, +10, 0
÷ Normal playback will continue even after the “REPEAT”
indicators have turned off.
3 Press the 6 key.
Lights
2 Press the REPEAT key repeatedly until “REPEAT”
is displayed.
2 Select the track number to be repeated using the
numeric keys or the 4 or ¢ key. The playback
of the selected track will start.
3 During playback, press the REPEAT key repeat-
edly until “REPEAT ONE” is displayed.
6
CD
CDR
6
4 ¢
P.CALL
REPEAT
C D 0 1
0 : 0 0
REPEAT ONE
C D 0 1
0 : 1 2
REPEAT
REPEAT
CD CDR
PGM
Numeric keys
CD 6,CDR 6 REPEAT
4,¢
1 2 3
4 5 6
7 8 9
+10
CD
Lights
To play a CD-R/RW disc with repeated playback, it is
required to finalize the disc.
∏
÷ If the "PGM" indicator is lit, press the PGM key to turn it off.