Before 2/15/07, Adjusting the tension of the flip up footplate – Invacare Van Seat PHWH93 User Manual

Page 25

SECTION 6—FRONT RIGGINGS

Before 2/15/07

NOTE: For this procedure, refer to FIGURE 6.11.

1. Loosen the footplate mounting screw

and move the footplate to the desired
angle.

NOTE: DO NOT remove the footplate
mounting screw.

2. Tighten the footplate mounting screw

to secure the footplate in the desired
position.

3. Repeat STEPS 1 and 2 for the other

footplate.

FIGURE 6.11 Adjusting the Footplate

Adjusting the Tension of the Flip Up Footplate

NOTE: For this procedure, refer to FIGURE 6.12.

NOTE: The tension can be adjusted to increase or decrease the rotation effort of the flip up
footplates.

1. Loosen the mounting screw on the footrest angle hinge to decrease the rotation effort.

NOTE: DO NOT remove the footplate mounting screw.

2. Tighten the footrest angle hinge mounting screw to increase the rotation effort.

3. Repeat STEPS 1 and 2 for the other footplate.

FIGURE 6.12 Adjusting the Tension of the Flip Up Footplate

Center Mount

Footrest

Footplate

Mounting Screw

Footplate

Footrest Angle Hinge

Mounting Screw

Footrest Angle Hinge

Center Mount

Footrest