I-Data 812-1x MIO - Manual (Page 37)

ida 812-1x MIO Operator’s Guide
Font Selection
-37-
9. Font Selection
The factory default GFID Table below lists all the predefined fonts
which are supplied with the interface GFIDs (GFIDs 1 - 399)
6 .
Fonts with GFIDs above 400 (i.e. scalable fonts) are described in the
section Scalable Fonts below.
For further details on defining fonts, please see Appendix A. FSL
Functions, Function Y91 and Y96.
If more details on these FSL functions are required , you are referred
to the Programmer's Guide (D62026).
In the following Default GFID Table, the Attribute, Symbol Set and
Translate Table figures will refer to the following:
ATTRIBUTE
0 = No attributes
1 = Bold
2 = Italic
3 = Bold and italic
4 = Proportional
5 = Proportional bold
6 = Proportional italic
7 = Proportional bold and italic
SYMBOL SET and TRANSLATE TABLE
0 = Default table
1 = Roman 8
2 = IBM PC-8
3 = ECMA Latin 1
4 = Roman 8
5 = US ASCII
6 = OCR A
7 = OCR B
8 = PC 850
6 If, for reasons of backward compatibility, you wish to reestablish the fonts > 400
in the default GFID table, please contact you i-data supplier.