I-Data 812-1x MIO - Manual (Page 21)

ida 812-1x MIO Operator’s Guide
Front Panel Seup
-21-
5. Front Panel Setup
This chapter describes the setting up of the ida 812-1x MIO
interface via the printer's front panel. Setting up via the front panel
provides an alternative to setting up FSL functions. But please
note that the front panel only offers a few basic setup options. If
you need to make further adjustments, you can use FSL (for non-
IPDS) in addition to front panel setup.
• HP LaserJet III Si
• HP LaserJet 4, HP LaserJet 4 Plus,
• HP LaserJet 4 Si series of printers, HP LaserJet 4V
• HP LaserJet 5 and 5Si
• HP Color LaserJet
On the next page, you will find a navigation chart showing the
setup options for the ida 812-1x MIO via the Front Panel.
5.1. Main menu
All front panel communication between the user and the ida 812-
1x MIO NON-IPDS Menu is done as follows:
• For HP LaserJet IIISi: PCL CONFIG MENU
Access to PCL CONFIG MENU:
1.
Go OFF Line
2. Hold MENU key down for approx. 10 seconds until the
PCL CONFIG MENU appears.
3. Toggle MENU key till the NON-IPDS MENU appears.
• For HP LaserJet 4, 4 Plus and HP LaserJet 5: MIO MENU
Access to MIO MENU:
1.
Go OFF Line
2. Toggle MENU key until the MIO MENU appears.
3. Press ITEM key and the NON-IPDS MENU appears.
• For HP LaserJet 4/5Si and HP LaserJet 4V: MIO MENU 1
1.
Go OFF Line
2. Toggle MENU key until the MIO MENU 1 appears.
• For HP Color LaserJet: MIO CONFIG MENU
Access to MIO CONFIG MENU:
1.
Go OFF Line
2. Toggle MENU key until the MIO CONFIG MENU appears.
3. Press ITEM key and the NON-IPDS MENU appears.