Syntax of an fsl function, Supported fsl functions, Invalid escape sequence – I-Data 812-1x MIO User Manual
Page 34

ida 812-1x MIO Operator’s Guide
Function Selection via the Line
-34-
7.3. Syntax of an FSL Function
The special sequence that the interface will interpret as an FSL
Function is shown in Figure 7-3.
%Y
Fig. 7-3: Syntax of an FSL Function. "%" is the defined ESC Character
7.4. Supported FSL Functions
In Appendix A, you will find a full list of the supported FSL Functions
with a description of their syntax and parameters. For a more
detailed description with notes, comments and examples you are
referred to the " ida 812-1x PCL Platform, Programmer's Guide", Doc.
No. D62026.
The notations below are used in the FSL summary description given
in Appendix A.:
% is the defined ESC Character
*
indicates the factory default
** indicates USA factory default, where if differs from
standard factory default
< > indicates mandatory parameter which must be
defined
[ ] indicates optional parameter which can be
defined, if r equired
7.5. Invalid Escape Sequence
The error message "Invalid Escape Sequence" will be printed on
paper if an invalid escape sequence has been sent to the printer.
Recovery:
Locate and correct the error in your setup file.