Inter-Tel USER GUIDE 8525 - Manual (Page 58)

46 Inter-Tel ® Model 8524/8525 User Guide
MOVING ON
I
NTRODUCTION
Now that you’ve mastered the basics, it’s time to move on to the advanced features. In
this section, you’ll learn how to set preferences for your endpoint, program buttons,
use directories, access your voice mailbox remotely, and perform various other func-
tions.
S
ETTING
E
NDPOINT
P
REFERENCES
Your endpoint and voice mailbox are automatically set to specific defaults. You can,
however, configure many of these settings at any time.
Changing Volume Levels
The endpoint has two volume levels; low and high.
To switch from low to high or vice versa (while you are talking on the endpoint):
Press
once.
To set the low volume level:
Press
until Volume Level displays and press . The Current Volume Level
appears. Use the dialpad to enter a volume level from 1 (softest) to 8 (highest). High
volume is automatically set two levels higher than low volume. If you have a headset
the headset’s low volume must be adjusted separately
.
Changing the Ring Type
The ability to change your endpoint’s ring type is helpful in close-quartered environ-
ments. Ring types include
Normal Ring , Vibrator Ring , Vib/Norm Ring .
To select the ring type for your endpoint:
1. Press .
2. Press until Ring Type displays and press .
3. Press to select Telephone Ring. The ring type currently set on your endpoint
displays with an asterisk (*).
4. Press until you see the ring type you want. Then press . “Normal” is
the factory set default. “Vibrator” ring type works only if your endpoint has the
optional vibrating ringer.
VOL
FNC 0
FNC
# > 0
0
# > 0