Intel Server Board S5000PAL - Manual (Page 63)

Jumper Block Settings Intel
®
Server Board S5000PAL / S5000XAL TPS
Revision 1.4
Intel order number: D31979-007
64
6.3 External RJ45 Serial Port Jumper Block
The jumper block J8A3, located directly behind the external RJ45 serial port, is used to configure either a
DSR or a DCD signal to the connector.
TP02303
J8A3
1-2: DCD to DTR 3-4: DSR to DTR
(factory default)
2
4 3
Figure 19. External RJ45 Serial Port Configuration Jumper