iSymphony M2 - Manual (Page 37)

M2 User Manual
37
Setting the Clock
1) Press the CLK/TIMER SET button, CLOCK will appear on the display.
2) Press the or of rotation button to select 12 or 24 hour.
3) Press the ENTER button ONCE. The Hour segments flash continuously.
4) Press the button to select the desired hour.
5) Press the ENTER button again the minute segments flash.
6) Press the button to select the desired minute.
7) Press the ENTER button once more. The flashing stops and the time is set.
Setting the Wake Timer
1) Press CLK/TIMER SET button twice. The LCD display will change to ON TIME
mode.
2) Press ENTER; then the hours segment flashes .
3) Press the button to select the wake-up hour.
4) Press the ENTER button again. The hours segment stops flashing. The min-
ute segment flashes.
5) Press the button to select to wake-up minute.
6) Press the ENTER button again. The minute segment stops flashing, and the
LCD display will change to OFF TIME mode.
7) Press the ENTER button. The hour segment flashes.
8) Press the to select OFF-TIME hour.
9) Press the ENTER button again. The hour segment stops flashing. The minute
segment flashes.
10) Press to select OFF-TIME minute.
11) Press the ENTER button again to complete the timer setting,
12) Press the TIMER/SNOOZE button to activate the timer. and TIMER ON
appears on the display.
13) Press TIMER/SNOOZE again to cancel the wake timer; disappears from
the display.
X-BASS
on time
1 2 : 1 0
t i m e r o n
1 2 : 0 0
o f f t i m e
1 0 : 0 0
1 0 : 1 0
0 0 : 0 0
0 0 : 0 0
1 0 : 0 0
c l o c k
0 0 : 0 0
1 0 : 1 0