iSymphony M2 - Manual (Page 35)

M2 User Manual
35
• User Preset Station Memory
1) Using either the manual or automatic tuning method described above, tune to the first station
you wish to memorize (Example: FM 103.50 MHz):
2) Press the PROGRAM/A-MEMO button on the remote control once.
Memory location number “__” will flash on the display and “PRGM”
will display for 5 seconds.
3) During the 5 seconds in step 1) above, select the desired memory
location by pressing the SKIP/PRESET button repeatedly.
Example “03”.
4) Press the PROGRAM/A-MEMO button again to store the station in that location.
5) Tune to the next station you wish to store and repeat steps 1 to 4 until you have stored up to
40 stations in the FM band. You may then press the TUNER/BAND button to switch to the AM
band and follow the same procedure to enter up to 40 AM stations in the tuner memory.
Tuning into a Preset Station
1) Press TUNER/BAND repeatedly to select the AM or FM band
2) Press the SKIP/PRESET button to select the preset station or use the numbered buttons to
enter the memory location of the preset station.
fm 103. 5 ST
PRGM
0_
MHz
fm 103. 5 ST
PRGM
MHz