Invacare IRC10LX - Manual (Page 19)

SECTION 5—OPERATING INSTRUCTIONS
Part No 1118353 19 Platinum ™ Series
7. Attach oxygen tubing from the humidifier bottle to
oxygen outlet connector on the oxygen concentrator
(FIGURE 5.4).
8. Attach the cannula/patient supply tubing to the
humidifier bottle outlet (FIGURE 5.4).
9. After assembly, ensure that oxygen is flowing through the
cannula.
FIGURE 5.4 Attaching the Oxygen Tubing
Power Switch
NOTE: For this procedure, refer to FIGURE 5.5 on page 19.
1. Press power switch to on position. All the panel lights and
the audible alarm will come on for one second, indicating
that the unit is functioning properly.
FIGURE 5.5 Power Switch
Oxygen
Tubing
Humidifier Outlet
Oxygen Outlet
Connector
On/Off (I/O)
Power Switch