Insignia HD16 - Manual (Page 7)

Document 900.0345 Rev 1.02 7
03/07
Installation
The HD16 Camera is designed to be flush or surface mounted on a wall or
ceiling. It is weather sealed for indoor or outdoor locations.
Overview of Assembly Procedure
Figure 1 Installation Components
Task See section
1. Mount the HD16 to a ceiling or wall. See “Mount the HD16” on page 8.
2. Connect the cable to the camera
board.
See “Connect the Power Cable” on
page 9.
3. Secure the gimbal into the HD16
base.
See “Install the Camera Assembly”
on page 10.
4. Adjust the camera settings. See “Adjust the Camera” on page 10.
5. Secure the cover. See “Secure the Camera and Dome
Enclosure” on page 16.
Skirt (optional)
HD16 base
Gimbal
HD16 dome cover