Tickets with gaps – Intermec PX4I User Manual
Page 119
EasyCoder PX4i User’s Guide (IPL version)
105
Appendix B — Media Specifi cations
Tickets with Gaps
⇐ a ⇒ Media Width
Maximum:
120 mm (4.72 inches)
Minimum: 25
mm
(1.00
inches)
⇐ b ⇒ Copy Length
Maximum:
6,143 mm (241 inches)
provided there is a suffi cient amount of free SDRAM memory
Minimum (without LTS):
8.0 mm (0.32 inches)
Minimum (with LTS):
12.0 mm (0.47 inches)
⇐ c ⇒ LSS Detection Position
Variable, see Chapter 11.
⇐ d ⇒ Detection Slit Length
The length of the detection slit (excluding corner radii) must be mini-
mum 2.5 mm (0.10 inches) on either side of the LSS detection position
(e).
⇐ e ⇒ Detection Slit Height
Maximum: 25.0
mm
(0.98
inches)
Recommended:
1.6 mm (0.06 inches)
Minimum:
1.27 mm (0.05 inches)
Opacity
Max opacity difference:
48%
Media Type Setup
• Gap
Note: Do not allow any perforation to break the edge of the
media as this may cause the media to split and jam the printer.