Intelligent Motion Systems MDM42 AC - Manual (Page 5)

© Intelligent Motion Systems, Inc. All Rights Reserved. REV060208
IMS Product Disclaimer and most recent product information at www.imshome.com.
Intelligent Motion Systems, Inc.
370 North Main Street, P.O. Box 457
Marlborough, CT 06447 - U.S.A.
Tel. +00 (1) 860 295-6102 - Fax +00 (1) 860 295-6107
e-mail: [email protected]
http: //www.imshome.com
U.S.A. SALES OFFICES
Eastern Region
Tel. 862 208-9742 - Fax 973 661-1275
e-mail: [email protected]
Central Region
Tel. 260 402-6016 - Fax 419 858-0375
e-mail: [email protected]
Western Region
Tel. 602 578-7201
e-mail: [email protected]
IMS ASIA PACIFIC OFFICE
30 Raffl es Pl., 23-00 Caltex House, Singapore 048622
Tel. +65/6233/6846 - Fax +65/6233/5044
e-mail: [email protected]
IMS EUROPEAN SALES MANAGEMENT
4 Quai Des Etroits
69005 Lyon, France
Tel. +33/4 7256 5113 - Fax +33/4 7838 1537
e-mail: [email protected]
IMS UK Ltd.
Sanderson Centre, 15 Lees Lane
Gosport, Hampshire PO12 3UL
Tel. +44/0 2392-520775 - Fax +44/0 2392-502559
e-mail: [email protected]
TECHNICAL SUPPORT
Tel. +00 (1) 860 295-6102 - Fax +00 (1) 860 295-6107
e-mail: [email protected]
–N Control
Knob
Example: MDM1MSZ42B2–N adds a rear control knob to
example #1.
Not available with sealed –65 versions.
–E Internal
Encoder
OPTIONS
Example: MDM1MSQ42B2–EX adds an internal 512-line differential
optical encoder with index mark to example #1.
Refer to encoder specifications section for line counts and part numbers.
–G Planetary
Gearbox
Example: MDM1MSZ42B2 –G1A2 adds a PM105 1-stage
planetary gearbox with 5.18:1 ratio to example #1.
Add –F for optional NEMA flange.
Refer to gearbox page for complete
table of ratios and part numbers.
– F
Optional NEMA Flange
MDM MSZ4 2 –
A = Single Length
B = Double Length
Example #1: Part Number MDM1MSZ42B2
is an MDrive42AC Plus Microstepping with
19-pin M23 circular I/O & SPI communications
interface, NEMA 42 double length motor and
240 input voltage.
OPTION
Input Voltage
1 = 120 Volt
2 = 240 Volt
MDrive Version
P1: I/O & Communications,
19-Pin M23 Circular Connector
P3: Power, 3-Pin Euro AC Connector
**Consult Factory for Availability.
Motor
Plus
base version
Plus 2 -65
**
IP65 sealed
QuickStart Kit
details above
K
1 = Plus
2 = Plus-65 (sealed)**
ORDER INFORMATION — MDrive42AC Plus Microstepping
CONNECTING
QuickStart Kit
For rapid design verifi cation, all-inclusive QuickStart Kits have com-
munication converter, prototype development cable(s), instructions
and CD for MDrivePlus initial functional setup and system testing.
Communication Converter
Electrically isolated, in-line con vert er pre-wired with mating connec-
tor to conveniently set/program communication parameters for a
single MDrivePlus via a PC's USB port. Length 12.0' (3.6m).
Mates to connector:
5-Pin
M12 ............................................MD-CC301-001
Prototype Development Cables
Speed test/development with pre-wired mating connectors that
have fl ying leads other end. Single-ended cordsets are PVC jack-
eted with foil shield and unconnected drain wire. Length 13.0'
(4.0m).
Mates to connector:
19-Pin M23
Straight Termination ..........................MD-CC100-000
Right Angle Termination .....................MD-CC101-000
3-Pin Euro AC
Straight Termination ..........................MD-CC200-000
Right Angle Termination .....................MD-CC201-000
OPTIONS
Internal Encoder
An internal 512-line (2048 count) differential optical
encoder with index mark is available factory-mounted.
Control Knob‡
For manual shaft positioning, a factory-mounted rear control
knob is available.
Planetary Gearbox
Effi cient, low maintenance planetary gearboxes are
offered factory-mounted. Refer to details and part num-
bers on the back cover.
‡ Not Available with Sealed –65 Versions.
Connectivity details: www.imshome.com/cables_cordsets.html
PART NUMBERING
CONNECTIVITY OPTIONS
new
new