Moxa Technologies C104H/PCI Series User Manual
Page 24
3-10
Smartio C104H/PCI Series User’s Manual
Add Another C104H/PCI Series Board Configuration
If another MOXA C104H/PCI Series board is plugged and needed to be re-
configured, please see this section for details. Up to four C104H/PCI Series board
can be installed in ONE system under Windows NT as long as the system sources is
sufficient.
Except procedures listed below, it is also allowed to do so by clicking [Start] è
[Program Files]
è [MOXA Utility] è [MOXA Smartio/Industio
Configuration Panel] è [Add] and then also refer to step 7-21 in the previous
section Installing Driver.
1.
Open [Control Panel], click [Network] icon and select [Adapters] tab.
2.
Click on MOXA Smartio/Industio Family Adapter in Network Adapters
list.
3.
Click [Properties] button to open Moxa Smartio/Industio Configuration
Panel dialog box.