Moxa Technologies C104H/PCI Series - Manual (Page 20)

3-6 Smartio C104H/PCI Series User’s Manual
18. Click [OK] button in MOXA Smartio/Industio Configuration Panel to
return to Network dialog box.
19. Click [OK] button in to exit Network dialog box.
20. Restart the PC.
Note! The driver configuration will NOT take effect until you restart the
PC.
Note! Double check if all the Smartio C104H/PCI Series components –
the control board and the external 1X4 cable – are connected and
fastened tightly to make sure that the system and the driver start
successfully.
Once the system restarts, you may check the event log issued by the MOXA
driver to see if the ports of the board are initialized successfully.
21. Enter the [Administrative] group, click [Event Viewer] icon and select [Log]
and [System] to check a message similar to “MOXA C104PCI series, with
first serial port COM3, has been enabled” for each configured board.